Open 24/7 for leaks and roof emergencies Call (929) 412-6597

Roofing systems

Commercial modified bitumen roofing in New York City

Layered, asphalt-based sheets that have covered New York flat roofs for decades. Still the right answer on many buildings, and one where torch safety and the reflectance rule both need a plan.

  • HoursOpen 24/7
  • NYC license2135523-DCWP
  • EstimateFree, in writing

What modified bitumen is

Modified bitumen, or mod-bit, is a roof built from asphalt sheets that have been modified with polymers to make them more flexible and durable than plain asphalt felts. The sheets are laid in layers, usually two plies on a commercial roof, with a surface cap sheet that is often coated with granules for protection against UV and foot traffic.

There are three ways it goes down, and the choice matters for safety and for the building:

TypeHow it is applied
Torch-applied (APP)Asphalt modified with atactic polypropylene, heated with a propane torch as each sheet is rolled out. Tough, forgiving on flat decks and widely used on New York flat roofs.
Torch-applied (SBS)Asphalt modified with styrene-butadiene-styrene rubber. More flexible in cold weather and better at bridging movement, usually the choice where the building sees large temperature swings.
Self-adheredSheets with a factory-applied adhesive that bonds to a primed substrate under pressure. No flame on the roof, which matters on occupied buildings and near air intakes.

Product types as described in GAF's modified bitumen product literature. We pick the product per job, and whether it is torch-applied, SBS or self-adhered is written into the scope.

Torch work in an occupied building

Torch-applied roofing is the reason mod-bit is still common in New York, and it is also the reason we treat it as a fire-safety job before it is a roofing job. The FDNY certificate of fitness G-60 covers torch use of flammable gas, and the FDNY's own page states that any torch operation for torch-applied roofing systems must be performed by a certificate of fitness holder. Torch crews on our jobs are held to that.

On an occupied building that means planning the torch work around the building itself:

  1. Distance to what can burn. Stored materials, parapet framing, vents, air intakes and any open windows nearby are cleared or covered before the torch is lit.
  2. Fire watch. Someone stays on the roof and below the work area after the last torch pass, for as long as the roof is hot enough to start a fire. We agree the length of that watch with the building before the job starts.
  3. Fire extinguishers and water. Kept on the roof where the torch is working, not carried up after the first pass.
  4. Air intakes. Dampers or covers on any intake near the work, so asphalt fumes are not drawn into the building.
  5. Self-adhered as the alternative. Where a flame on the roof is not acceptable, self-adhered sheets bond under pressure with no torch. They cost more per square and suit some buildings far better.

Torch rule: FDNY certificate of fitness G-60. Fire watch, distance and extinguisher practice are our own job-site requirements, not quoted code text.

The reflectance rule and reflective cap sheets

The Building Code requires low-slope roof coverings to reach an initial solar reflectance of 0.7 with thermal emittance of 0.75, or an SRI of 82, unless an exception applies. A standard dark granule cap sheet does not reach that. Reflective cap sheets are available: white or light granules, a white acrylic coating applied over or baked onto the surface, or a white film laid on during manufacture.

Three points decide whether a mod-bit roof complies:

  • The data sheet, not the sample. The compliance figures are the tested values on the manufacturer's data sheet for that exact product. A light-looking sample proves nothing.
  • The aged value. Reflectance falls as a roof weathers and collects dirt. The initial value is the one the code sets, but a reflective roof that has lost half its reflectance is a maintenance problem for the owner, so we ask for both figures and say which one we are relying on.
  • Repairs. Patching a reflective cap sheet with a dark or different surface can leave a patch that is not reflective. Repairs to a reflective roof should be made with a matching product.

Threshold and exceptions: 2022 NYC Building Code §1504.9. The reroof exemption and the full exception list are in our cool roof guide.

Where mod-bit is the right answer

SituationWhy mod-bit fits
Repairing and extending an existing mod-bit roofUsually the most sensible use: matching the existing system, patching around new penetrations, and extending service life where the deck and insulation are sound.
Smaller and mid-sized flat roofs with foot trafficGood tolerance of walking, roof hatches and equipment service. The granule surface wears well where people step regularly.
Rowhouse and walk-up buildings with parapets all roundCompact, detail-heavy roofs where a mod-bit membrane turned up the walls and parapets copes well with the awkward edges.
Large open roofsPossible, but a single-ply membrane is often faster to install and gives fewer seams to inspect. We price both before recommending.

On a large open roof with a sound deck and plenty of equipment, a white single-ply membrane is often the stronger choice, and on a rubber roof that is still sound, EPDM repair can beat both.

Where mod-bit is the wrong answer

  • A wet deck or insulation: no cap sheet fixes water underneath, and torching over it traps the water.
  • A roof already carrying two or more layers of covering, where the Building Code's reroof rules require the tear-off instead of a recover.
  • An exposed replacement with the reflectance rule in play and no reflective product chosen. Black granule cap sheet fails the rule.
  • A building where torch work cannot be planned safely around occupants, stored materials or air intakes, and self-adhered is not an option.

Repair, recover or replace

Mod-bit is very repairable. Blisters, open laps and a worn cap sheet are often fixed by cutting, drying and patching, or by an extension of the surface. Where the roof has several layers, the deck is soft or the insulation is wet, the honest answer is replacement, and the tear-off is also the chance to correct drainage and details. The decision rests on a core cut and the drainage picture, not on the age of the roof. For a leak now, see commercial roof repair; for a full replacement, commercial roof replacement.

Questions owners ask about mod-bit

Is torch-applied roofing allowed on any New York building?

Torch work is controlled. The FDNY certificate of fitness G-60 covers torch use of flammable gas, and the city's guidance says that any torch operation for torch-applied roofing has to be performed by a certificate holder. We send only certificate holders to torch, and the written scope says so. Self-adhered systems are the option when a flame on the roof is not acceptable.

Does a modified bitumen roof meet the cool roof rule?

Only if the cap sheet is a reflective product with its values proved on the data sheet. Plain black granule cap sheets do not meet the reflectance threshold on their own. Reflective cap sheets exist, usually white granules, a white acrylic coating, or a white film over the surface, and their rating is what counts. Check the aged value as well as the initial one: the rule is set on the initial value, but a roof that has lost its reflectance is a maintenance question for the owner.

How long does a mod-bit roof last in New York?

Depends on the grade, the detailing and the maintenance more than on the name. A well-detailed, maintained two-ply system on a sound deck can last many years; a single ply over tired insulation with open laps does not. The useful question is what is left after a core cut and a seam check, which tells us more than any age figure.

We have blistering on a mod-bit roof. Is that a repair?

Sometimes. Small blisters that are dry underneath can be cut, dried and patched. Blisters with water beneath, or several across the field, usually mean the insulation is wet and the repair has to go down to it. A core cut before anything is sealed settles which one you have.

Send the address and a few roof photos

We will tell you what we see and when we can be on the roof. Estimates are free and come in writing.