Areas · Brooklyn
Commercial roofing in Brooklyn
Warehouse and loft roofs in the old manufacturing belts, stores with apartments above them, and walk-ups by the thousand. Brooklyn's commercial roofs are mostly low, wide and old, and that decides how they fail.
- HoursOpen 24/7
- NYC license2135523-DCWP
- EstimateFree, in writing
What a Brooklyn commercial roof usually is
People picture a warehouse when they hear commercial roofing, and Brooklyn has those. But the borough's building count tells a different story: the roofs we are called to are far more often over a shop with tenants above, a walk-up, or a single-story store with air conditioning units bolted to it. City land-use records list 265,803 Brooklyn tax lots with a building on them. Here is how the commercial and mixed-use part of that breaks down.
| Building type | How many | What it means on the roof |
|---|---|---|
| Two-family buildings | 94,708 lots | Small flat roofs over occupied floors; a leak is an emergency the same night |
| Walk-up apartment buildings | 63,054 lots | Parapets on three or four sides, bulkheads, fire escapes to work around |
| Residential with a store | 18,262 lots | The classic Brooklyn mixed-use roof: a shop below, tenants above, one roof over both |
| Store buildings | 5,897 lots | Wide single-story roofs with rooftop units, often added over the years |
| Warehouses | 2,455 lots | 48.4 million sq ft of floor area: the large open roofs |
| Factory and industrial | 1,475 lots | Old manufacturing stock, often with sawtooth or multi-level roofs |
Counts queried from the city's land-use file (PLUTO on NYC Open Data), November 2026. They count tax lots with a building, not individual roofs.
Old industrial stock, and why the age matters
Roughly half of Brooklyn's warehouse, factory and loft buildings were built before 1940, and about nine in ten of them are only one or two stories. That combination is why a Brooklyn re-roof is rarely a straight membrane swap. A ninety-year-old low-rise industrial building has usually been re-roofed more than once, has a timber or early concrete deck, and carries equipment added decades after the roof was designed for it. Before quoting we need to know how many layers are up there, what the deck is, and whether the insulation is still dry, because those three answers decide between a recover, a tear-off and a coating.
The newer stock behaves differently. The 1950s and 1960s brought several hundred more industrial buildings, and those tend to have steel decks, wider spans and bigger single roof areas, where ponding at mid-span and failed seams around skylights are the usual complaints.
Where Brooklyn roofs leak first
On attached, low-rise buildings of this age, leaks start in a short list of places. A proper inspection covers all five, not only the wet spot that was reported.
- Parapets and coping. On attached Brooklyn buildings the parapet is shared with the neighbour and is where most old roofs start leaking. We look at the coping joints, the back of the parapet and the base flashing before anything else.
- Drains and scuppers. Low-rise roofs behind a street wall drain to one or two points. Grit from traffic and tree litter fills them, and the water then sits over the seams.
- Rooftop units and vents. Restaurant exhaust, condenser curbs and old vent stacks are the second most common leak source we find on mixed-use roofs, not the field of the membrane.
- Old roof build-ups. Several layers of asphalt over a timber deck is normal in prewar Brooklyn stock. How many layers are already up there decides whether a recover is allowed or a tear-off is needed.
- Shared walls and light wells. Where a taller neighbour rises above your roof, the flashing against that wall is the detail that fails. Light wells and rear extensions add more edges.
Historic districts: the rule that catches people out
Brooklyn has 42 designated historic district areas, more than any borough except Manhattan, and they cover exactly the kind of mixed-use blocks where commercial roofs sit above shops. The Landmarks Preservation Commission's test is visibility: staff cannot approve a rooftop addition that is visible from a public thoroughfare, and for a minimally visible one the visible part must not span more than 50% of the facade it is seen above. Visibility is judged from any public thoroughfare, including views through alleyways and gaps in the street wall, and even from a significant distance.
For ordinary roofing that is good news: a flat roof hidden behind a parapet is usually not the commission's concern, and its guidebook states that replacing flat roofing on existing additions needs no permit. The trouble starts when something is added that rises into view: a new bulkhead, a taller curb for an HVAC unit, a rooftop deck. If the building is landmarked, we plan that part with you before it is designed, not after it is refused.
Sources: LPC historic districts on NYC Open Data (queried November 2026) and the LPC Permit Guidebook, Chapter 6: Additions. LPC can be reached at 212-669-7817.
Waterfront and low-lying blocks
Brooklyn's coastline runs from Greenpoint around to Coney Island and out to Canarsie, and the city has singled out parts of it for study. Its Resilient Neighborhoods work covers Sheepshead Bay, Gerritsen Beach and Canarsie among ten study areas citywide; in Sheepshead Bay, city planners record that water reached four to eight feet above grade during Hurricane Sandy, and expect flood risk to grow with sea level rise.
Water at street level does not damage a roof, but it shapes what ends up on one. The city's flood-resistant construction rules set minimum elevations for utilities and equipment against the design flood elevation, which pushes mechanical plant upward, often onto the roof. The practical result for an owner in Red Hook, Gowanus or Canarsie is a roof with more curbs, more pipe penetrations and more flashing than a comparable building further inland, plus salt-laden wind on exposed waterfront parapets and edge metal. Those are the details we price carefully and photograph on every visit.
Sources: NYC Planning, Resilient Neighborhoods: Sheepshead Bay and NYC Building Code Appendix G.
The industrial campuses
A good share of Brooklyn's large roof area sits inside a handful of managed campuses rather than on standalone buildings. The Brooklyn Army Terminal in Sunset Park alone lists about 4.1 million square feet of manufacturing space with more than 100 companies in it, and leasable units that run from 1,500 square feet up to 200,000 square foot floor plates. Industry City and the Brooklyn Navy Yard work the same way: many tenants under a few very large roofs.
If you are a tenant in one of these, the roof is usually not yours to repair, and the first question is who holds the roof warranty and who authorises work. If you manage one of the buildings, the practical issues are access routes for materials, the landlord's own contractor rules and keeping tenants running while the work happens. Tell us which situation you are in and we will scope accordingly. Building types we have worked on: warehouses, factories, stores, offices, apartment buildings, schools, houses of worship and hospitals.
Figures: Brooklyn Army Terminal leasing brochure, September 2025.
Permits and filings for a Brooklyn job
Most re-roofing that stays above the deck is exempt from a Department of Buildings permit under the city's rule on minor alterations and ordinary repairs; work that opens the deck or the structure is not, and the Energy Code can pull a job back into permit territory when insulation is added. We tell you in the written scope which case your job falls into, and we file what is needed: the DOB & DOT permits, usually taking 3 days to a week.
Filing is done online, but Brooklyn has its own borough office for in-person plan examination and records requests, which moved to 345 Adams Street, 3rd Floor in November 2022. Many third-party sites still list the old Joralemon Street address. Street occupancy for a container, a hoist or a material drop is a separate permit, and on narrow Brooklyn streets it is often the part that sets the start date.
Sources: 1 RCNY §101-14 and the DOB service notice on the Brooklyn Borough Office move.
Services for Brooklyn buildings
The same three services cover every borough; what changes is the roof they are applied to.
- Commercial roof repair: leaks traced to the parapet, drain, curb or seam that caused them, with photos of the cause.
- Commercial roof replacement: tear-off or recover where the code allows it, new insulation and membrane, drainage corrected.
- Inspections and maintenance: scheduled visits, drains cleared, a dated photo report for the building file.
On systems: TPO and PVC single-ply suit the wide, open roofs in the industrial belts, while coatings can extend a sound older roof that is not yet wet underneath. We choose the manufacturer per building rather than from a fixed catalogue. Industrial owners: our warehouse roofing page covers drains, skylights and phasing.
Brooklyn neighborhoods we cover
Sunset Park · Industry City · Red Hook · Gowanus · Park Slope · Greenpoint · Williamsburg · East Williamsburg · Bushwick · Bedford-Stuyvesant · Crown Heights · Flatbush · Borough Park · Bay Ridge · Dyker Heights · Canarsie · East New York · Brownsville · Sheepshead Bay · Coney Island · Brooklyn Navy Yard area · Downtown Brooklyn · Fort Greene · Clinton Hill · Prospect Heights, and the rest of the borough. These are plain text on purpose: a neighborhood only gets its own page here once we have a real job there or research that is true for that place alone (see the areas page for how that works).
Buildings in Manhattan go to our sister site manhattanroofing.nyc, the same company with the same license and insurance.
Questions from Brooklyn owners and managers
Does a Brooklyn historic district stop us re-roofing a flat roof?
A flat roof you cannot see from the street is normally not what the Landmarks Preservation Commission is concerned with; its rules turn on what is visible from a public thoroughfare. The commission's own permit guidebook also states that no permit is required for replacing flat roofing on existing additions. What does get reviewed is anything that changes the shape or the skyline: a rooftop addition, a new bulkhead, raised equipment. Brooklyn has 42 designated historic district areas, so check whether the building sits in one before planning anything that rises above the parapet.
Our building is in a flood zone. Does that change the roof work?
Not the membrane itself, which is above the water line. What flood rules reach is the equipment: the city's flood-resistant construction rules set minimum elevations for utilities and equipment relative to the design flood elevation, which is one reason mechanical plant ends up on the roof in low-lying Brooklyn blocks. That means more curbs, more penetrations and more flashing details on your roof than a comparable building inland, and those details are what we check first.
Who files the permits for a Brooklyn job, and where do they go?
We file them. Most roof work that stays above the deck does not need a Department of Buildings permit, but work that opens the deck or the structure does. Filings are made online through DOB NOW; the Brooklyn Borough Office, which moved to 345 Adams Street, 3rd Floor, in November 2022, handles in-person plan examination and records requests for Brooklyn properties. Street space for a container or hoist needs its own permit.
Can you work on a roof in a working warehouse or distribution building?
Yes. Most of the borough's industrial buildings are one or two stories, so the work sits directly over a floor that is in use. What makes it safe is sequencing: we agree which bays are worked on which day, keep hot work away from loading operations, and avoid cutting over racking or anything left open. Nine in ten of Brooklyn's warehouse, factory and loft buildings are one or two stories, so this is the normal case here, not an exception.
Send the address and a few roof photos
We will tell you what we see and when we can be on the roof. Estimates are free and come in writing.