Drains a long walk apart
A big roof may have a handful of drains for thousands of square feet. One blocked strainer backs water across a whole bay, and the leak shows up wherever the deck has a joint, not under the drain.
Building types
Big, low roofs over stock, machines and people at work. They fail at drains, seams and skylights long before the field of the membrane wears out, and they have to be fixed without stopping what happens underneath.
Outside Manhattan the city's land-use file lists 9,077 warehouse and factory lots with about 182 million square feet of floor area. Most are modest: the average building is around 20,000 square feet and 61% are a single story. But 727 have 50,000 square feet or more, and 303 pass 100,000. Self-storage is a group of its own: only 261 lots, yet 23 million square feet, with buildings that average close to 90,000 square feet.
| Borough | Warehouse and factory lots | Floor area (sq ft) | 50,000 sq ft or more |
|---|---|---|---|
| Brooklyn | 3,928 | 68.6M | 244 |
| Queens | 3,402 | 71.1M | 317 |
| The Bronx | 1,197 | 31.1M | 134 |
| Staten Island | 550 | 10.8M | 32 |
Age varies by borough. About half of Brooklyn's industrial buildings predate 1940, the Bronx is not far behind, and Staten Island's are mostly from 1980 on. An old Brooklyn loft and a 2018 distribution shed are both "warehouse roofs", but one usually has layers of old roofing on wood or concrete and the other a single membrane on a steel deck.
Queried from PLUTO on NYC Open Data (building classes E and F; Brooklyn, Queens, the Bronx, Staten Island), November 2026.
Where they leak
A big roof may have a handful of drains for thousands of square feet. One blocked strainer backs water across a whole bay, and the leak shows up wherever the deck has a joint, not under the drain.
Long steel joists deflect, and an old roof settles into shallow bowls between the supports. Water that stands for days ages the membrane and finds every weak seam in the low spot.
Wind lifts hardest at the corners and along the perimeter. On a fastened single-ply roof, that is where seams flutter, fasteners back out and edge metal works loose first.
Older sheds have rows of them. The curb flashing leaks long before the glazing, and plastic domes go brittle in the sun.
Every unit has a curb, a gas or power line and a condensate line, and service technicians cross the roof to reach it. Dropped screws and panels left off puncture membranes.
Where a newer bay meets an older one, the two move differently. The joint between them is a classic leak line in buildings that were extended over the decades.
A plastic dome or wired-glass skylight will not hold a person who steps or falls on it. Federal rules treat skylights as holes: during construction work, anyone on a roof must be protected from falling through one more than six feet above the floor by a cover, a guardrail or a personal fall arrest system, and for a building's own staff the threshold is four feet. On a roof with dozens of skylights, that protection is part of the job plan and part of the price, and it is worth asking any bidder how they will handle it.
Replacement is also a chance to deal with the skylights for good: new curbs flashed into the new membrane, impact-resistant units or screens, or closing off ones you no longer need with a properly framed and insulated infill.
Sources: 29 CFR 1926.501(b)(4) (construction) · 29 CFR 1910.28(b)(3) (general industry).
These are also the things that decide the price. We do not quote industrial roofs per square foot over the phone, because the site matters as much as the size: the building's location, how materials get up to the roof, how debris comes down, the space around the building and the roof's condition. For a budget figure and how a bid is built, see the cost guide.
For a large open roof with few people walking on it, a white TPO or PVC single-ply membrane is the usual answer: wide sheets, welded seams and a surface that meets the city's reflectance rule as made. Where there is heavy foot traffic around equipment, or the building already has an asphalt roof in good structural shape, modified bitumen holds up well. Older black EPDM roofs are common in the outer-borough sheds and are often worth repairing rather than replacing. If the roof is still dry underneath, a coating can add years for far less than a new roof. Our comparison of flat roof systems goes through the trade-offs by building.
Sources: 1 RCNY §101-14 · Building Code chapter 15 (§1504.9, §1511) · NYC Energy Conservation Code, C503.3.1.
We work in Brooklyn, Queens, the Bronx and Staten Island, on warehouses, factories, stores, offices, apartment buildings, schools, houses of worship and hospitals; see also store and office roofs and schools, houses of worship and hospitals. For the paperwork: we can name your company as additional insured on our certificate, usually within 1 day. License and insurance details are on our credentials page.
Usually, yes. The roof is replaced in sections, each one closed up the same day, and the sequence follows your bays, shifts and deliveries. What has to be agreed first is the hoisting and container location, the hours for noisy or smelly work, and anything below that needs covering.
It depends on what is there. The Building Code does not allow a new roof over one that is wet or deteriorated, or where two or more roof coverings already exist. A moisture survey and a few test cuts tell us which case you are in, and the written scope says it plainly.
After a site visit, in writing, for free. Size matters, but so does the site: the building's location, how materials get up to the roof, how debris comes down, the space around the building and the roof's condition. Two roofs of the same size can differ a lot once those are counted.
New roofs come with a 2-year labor warranty, plus a 20-year manufacturer warranty on materials, and any complaint in the first 2 years is repaired free. The written scope names the product, so you know whose material warranty you hold.
We will tell you what we see and when we can be on the roof. Estimates are free and come in writing.